Dlink DVG-2102S

InstallationDVG-2102S_Back

– Power up your Dlink device
– login to the web interface
– Click on VoIP Setup menu item to the left
– Under Proxy Server, click the edit button for entry 1

Configuration

– Enable Support of SIP Proxy Server / Soft Switch: Yes

ITSP Name: freelycall.com

FXS Representative Number

Number: 2XXXX (your freelycall account number)
Register: Yes
User ID / Account: 2XXXX (your freelycall account number)
Password: Lduer5G4qk2n (your freelycall account password)
Confirm Password: Lduer5G4qk2n (your freelycall account password)

Phone 1 –

Number: 2XXXX (your freelycall account number)
Register: Yes
Invite with ID / Account: Yes
User ID / Account: 2XXXX (your freelycall account number)
Password: Lduer5G4qk2n (your freelycall account password)
Confirm Password: Lduer5G4qk2n (your freelycall account password)

Phone 2 – 

Number: 2XXXX (your freelycall account number)
Register: Yes
Invite with ID / Account: Yes
User ID / Account: 2XXXX (your freelycall account number)
Password: Lduer5G4qk2n (your freelycall account password)
Confirm Password: Lduer5G4qk2n (your freelycall account password)

Proxy Server IP / Domain: freelycall.com
Proxy Server Port : 5060
Proxy Server Realm : (keep empty)
TTL (Registration interval) : 600
SIP Domain : freelycall.com
Use Domain to Register: No
Bind Proxy Interval for NAT: 0
Initial Unregister: No
Support Message Waiting Indication (MWI): Yes
MWI Subscribe Interval : 7200

Outbound Proxy Support: Yes
Outbound Proxy IP / Domain : freelycall.com
Outbound Proxy Port : 5060

Click on Apply button, it will refresh the screen. Go to the bottom of the webpage, click on ‘Save & Restart’. It will open screen to reboot, click the ‘Reboot’ button.
Wait till the device reboots, and you should be able to place calls.

To be sure if you are connected, click on ‘Status’ menu item, then ‘Voip Status’. It will show you ‘Successful’ for Port Status and Server Registration Status