Nokia N95

Installation

On the Nokia N95 some of VoIP settings are hidden by default, and you will need Nokia’s latest VoIP SIP application to show them.
To install it, go to this Nokia page: http://www.developer.nokia.com/Resources/Tools_and_downloads/Other/SIP_VoIP_settings_applications.xhtml and click on the link Download SIP VoIP settings apps

This application can be used to configure VoIP settings on your Nokia. You can create new VoIP profiles and modify the existing ones, and create and modify VoIP parameters and NAT/Firewall traversal settings and that are normally not visible on the device UI, such as codec settings and SIP domain-specific NAT settings. It is also possible to save all the VoIP profile settings to a text file. It also enables VoIP over WCDMA which means you can make VoIP call over 3G Internet connection

Once installation is complete you will be able to see “SIP VoIP Settings” application under Applications menu on your Nokia, which you will need in the last step of f this configuration guide for better voice quality or enabling VoIP over 3G Internet connection.

Configuration

Tools-> Settings-> Connection-> Sip settings
Profile Name: FreelyCall Profile
Profile: IETF
Access point: (your WLAN AP name or your Data Plan provider)
Public user name: 2XXXX@freelycall.com ( replace 2XXXX with your FreelyCall account number. When recorded your phone will show sip:2XXXX@freelycall.com )
Use Compression: No
Registration: “Always on ”
Use Security: No

Proxy Server Settings:
Proxy Server Address: freelycall.com
Realm: freelycall.com
User Name: 2XXXX@freelycall.com ( replace 2XXXX with your FreelyCall account number)
Password: Enter your FreelyCall Account Password (example: Lduer5G4qk2n)
Transport Type: Auto or UDP (or TCP if UDP is blocked, or you want to save battery)
Port: 5060 (or other port specified by support if this port is blocked)

Registrar Server Settings
Registrar Server: freelycall.com ((When created your phone will show sip:freelycall.com)
Realm: freelycall.com
User Name: 2XXXX@freelycall.com ( replace 2XXXX with your FreelyCall account number)
Password: Enter your FreelyCall Account Password (example: Lduer5G4qk2n)
Transport Type: Auto or UDP (or TCP if UDP is blocked, or you want to save battery)
Port: 5060 (or other port specified by support if this port is blocked)

Tools-> Settings-> Connection-> Internet Tel. Settings (If you cannot find it check Settings / Connectivity / Admin Settings / Net Settings)
Create a new profile for “freelcall”(2XXXX), name it “freelycall”
Choose “freelycall” as Preferred profile

Applications -> SIP Voip Settings  (not required and only available if you installed the VoIP SIP Application)
Choose VoIP services/Freelycall
Profile Settings -> Allow VoIP over WCDMA: ON
Codecs:: delete all codecs except G729. There should be only G729 codec left under codecs settings