Snom 870

Installation

Snom 870

  • This guide has been tested for Snom 320,360,370, 820, 821, 870 with firmware version 8.7.3.15
  • Start up the phone and identify its IP Address by pressing the “Help” or “7″ button.
  • Access the device web interface, by pointing your browser to the IP you got in previous step (Example: http://192.168.0.2)

Configuration

Open the device web interface, choose “Setup -> Identity 1″ page, and configure the values below

Login settings
Identity Active : on
Displayname : Enter your Name (example: Joe Doe)
Account : Enter your FreelyCall Account Number (example: 20001)
Password : Enter your FreelyCall Account Password (example: Lduer5G4qk2n)
Registrar : freelycall.com
Authentication Name : Enter your FreelyCall Account Number (example: 20001)
Mailbox : *#

RTP settings
RTP Encryption: off

Click the “Save” button, and then click the “Reboot” button that appears at the top of the page. Your phone will restart. After rebooting, the phone will retrieve its configuration files and register with FreelyCall.